LaCie 12big Rack Fibre 8 Manual do Utilizador descarregar pdf (Página 61)

LaCie 12big Rack Fibre 8 Troubleshooting & Problem Solving

User Manual page 61

The audible alarm can be muted by pressing the Mute button on the

OPS panel. Automatic muting will take place after two minutes if the

mute switch is not manually operated.

When the alarm is muted it will continue to sound with short intermit-

tent beeps to indicate that a problem still exists, It will be silenced

when all problems are cleared.

Table 15 - Alarm Conditions

Status Severity Alarm OPS Panel LED

PCM Alert – Loss of DC power from a single

PCM.

Fault – No Loss of Redundancy. S1 Module Fault.

PCM Alert – Loss of DC power from a single

PCM.

Fault – Loss of Redundancy. S1 Module Fault.

PCM Fan Fail. Fault – Loss of Redundancy. S1 Module Fault.

SBB Module detected PCM Fault. Fault. S1 Module Fault.

PCM Removed. Conﬁguration Error. None Module Fault.

Enclosure Conﬁguration Error. Fault – Critical. S1 Module Fault.

Low Warning Temperature Alert. Warning. S1 Module Fault.

High Warning Temperature Alert. Warning. S1 Module Fault.

Over Temperature Alarm. Fault – Critical. S4 Module Fault.

I2C Bus failure. Fault – Loss of Redundancy. S1 Module Fault.

OPS Panel Communication Error (I2C). Critical Fault. S1 Module Fault.

RAID Error. Fault – Critical. S1 Module Fault.

SBB Interface Module Fault. Fault – Critical. S1 Module Fault.

SBB Interface Module Fault – No function-

ing modules remaining.

Fault – Critical. S4 Module Fault.

SBB Interface Module Removed. Warning. None Module Fault.

Drive Power Control Fault. Warning – No loss of drive power. S1 Module Fault.

Drive Power Control Fault. Fault – Critical – loss of drive power. S1 Module Fault.

Drive Removed. Warning. None Insufﬁcient Power Available.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 86 87

Sem comentários

LaCie 12big Rack Fibre 8 Manual do Utilizador Página 61