LaCie 12big Rack Fibre 8 Manual do Utilizador descarregar pdf (Página 11)

LaCie 12big Rack Fibre 8 System Overview

User Manual page 11

1.3.4. Visible Alarms - OPS LEDs

The OPS panel displays a consolidated status for the modules and logical drives via its LEDs. The table below provides an explanation of the dif-

ferent states of each LED.

Table 01 - OPS Panel LED States

LED State Description

System Power Steady Green AC Power is applied to the enclosure.

Module Fault Steady Amber Indicates a:

✦ Power Cooling Module fault.

✦ RAID Controller fault, if an array exists with a drive fault.

✦ Disk I/O Module fault, if an array exists with a drive fault.

✦ Over or under temperature fault condition.

Refer to individual module fault LEDs.

Logical Fault Steady Amber Indicates a:

✦ Failure of a disk drive in an array. If this is a multiple enclosure conﬁguration, and the array drive

members are only in one enclosure only, that enclosure’s Logical Fault LED will be lit. If the array

drive members span across enclosures, all enclosures affected will have their Logical Fault LED

illuminated. (The LED will remain illuminated while the array is rebuilt.)

✦ An array rebuild is occurring.

NOTE: The Drive Fault LED for a failed drive will remain ﬁxed while the Drive Fault LEDs ﬂash for

healthy disk drives in the same array.

Disk drives that are not part of an array that is failing will not offer LED signals in the OPS panel.

Logical Fault Flashing Amber Indicates an array has a background parity check operation in progress.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 86 87

Sem comentários

LaCie 12big Rack Fibre 8 Manual do Utilizador Página 11